Product description PPR Fusion Welding Machine is suitable for PE / PPR / PVDF / PP pipes and fittings. Adjustable dual temperature control, heating time is half shorter than normal type, making your project efficient. Usage 1. Fix the heating side welding head, place the welding device on the shelf, install the corresponding heating tube die head according to the specifications, and tighten it with a hexagonal shape. Generally, the upper section is small and the rear end is large. 2. Connect the power supply (note that the power supply must be protected by a grounding wire), according to the corresponding model of the machine, it is advisable to change the light on the manual until the welding temperature control device enters the working state, you can start. 3. With the help of a vertical cutting device to cut the tube, the tube and accessories can also promote the welding device not to move in the mold according to the operation needs. After the heating time comes, immediately reach the position of the pipes and fittings removed from the die, and immediately rotate the uneven blades directly to the required depth to form a uniform flange joint. Feature 1. This machine adopts microcomputer control circuit and adds a variety of intelligent functions. It can automatically modify the ambient temperature, display the temperature in time, and send an alarm if it exceeds the temperature range. 2. The surface of the heating plate and die head are both high-quality coatings, which can effectively increase the service life of the machine. 3. The machine has reasonable design, simple appearance and easy operation. Application Suitable for hot melt socket welding of PP-R, HDPE, PB and PE plastic pipes and fittings.Ppr Welding Machine in stock website:http://www.wxsdwelding.com/ppr-welding-machine/